从 米兰 到 因特拉肯 的列车

🇮🇹 米兰 → 🇨🇭 因特拉肯

直线距离

169 km

NW (322.9°)

铁路距离

~220 km

铁路估算

行程时间

~57m

High_Speed

与飞行相比节省的 CO2

91.3%

39.2 kg CO2 更少

环境比较

火车

High_Speed

CO2 排放量 3.7 kg

飞机

经济舱

CO2 排放量 43.0 kg

乘坐火车节省 39.2 千克 CO2(减少 91.3% 的排放量)

路线信息

需要换乘

该路线的车站

旅行提示

Interlaken Ost, gateway to the Jungfrau region, is reached from Milan in three hours via Domodossola, Brig, and Spiez on SBB and BLS Lötschberg services. It is the departure point for the Jungfraubahn and Schynige Platte railways.

风景亮点

The BLS Lötschberg line between Brig and Spiez passes the Lötschberg base tunnel portals and traverses the Kandertal, with the Blüemlisalp and Doldenhorn peaks forming a classic Swiss Alpine backdrop.

预订提示

SBB sells through-tickets from Milan to Interlaken Ost; the Swiss Travel Pass is excellent value here as it covers the full journey and all Interlaken-area rack railways for onward Jungfrau exploration.

相关指南

继续您的旅程

常见问题

The estimated train journey from 米兰 to 因特拉肯 takes approximately 57m. This estimate is based on a rail distance of ~220 km using a high_speed service.
The estimated rail distance from 米兰 to 因特拉肯 is approximately 220 km (169 km straight-line). Rail routes are longer than straight-line distances because tracks follow terrain and connect intermediate cities.
Travelling by train from 米兰 to 因特拉肯 emits approximately 3.7 kg of CO2, compared to 43.0 kg by flight. Taking the train saves 39.2 kg of CO2 — a 91.3% reduction in emissions.
The route from 米兰 to 因特拉肯 typically requires at least one transfer. Check operator timetables for the most direct connection available.
Check regional and national rail operator websites for services between 米兰 and 因特拉肯.

Train vs Flight comparison

Compare door-to-door time, CO2 and cost for 米兰 to 因特拉肯

Compare now →

数据最后更新:2026-02-27